Product Description




Airwolf 3D Printer Specs – AW3D HD
Fully Assembled
Partially Enclosed Clear Proprietary Chamber
Print Bed: 12″x8″ Borosilicate Glass – Heated
Product dimensions: 18″ (height) x 24″ (width) x 18″ (Depth)
Weight: 18kg
Print heads / Extruders: Jam Resistant Single Extruder (single color) / ( Dual Extruder available on the HD2x model)
Max Extruder Temp: 260 F (320 F available on the HDX Models)
Filament Size and Types: 3mm ABS, PLA (poly acetic acid), HIP (high impact polystyrene), Nylon, PVA (polyvinyl alcohol), LayWOOD D-3, Soft PLA, PLA 4043, TPE, Thermoplastic Elastomer, Laybrick, BendLay, t-Glase (FDA Approved for food containers), Nylon 645, Bridge Nylon, TPU, PolyCarbonate, PET (polyester), ColorFabb XT Co-Polyester, bronzeFill (bronze metal) | Learn more about the expansive filament options HERE.
Print resolution X/Y Axis: 50 microns (.005″)
Layer thickness (resolution): .06mm (.006″)
Max Build Volume: 12″ (Z) x 8″ x 12″
Max Print Speed: 150mm/sec
Circuit Board: RAMBo by Ultimachine (Premium circuit board allows for expansion into dual extruder, more fans etc. Find more information HERE.
Software: MatterControl (configured by Airwolf3D), Firmware by Marlin, compatible with Repetier Host Print Controller, Slic3r GCode generator. All open source.
Operating System Compatibility:
Windows and Mac Operating Systems
Power Supply Input: 13.5V DC, 320W integrated, auto switching, works anywhere in the world
Connectivity: SD card for stand alone and USB cable optional
Warranty: 6 Months
What’s included in the Airwolf 3D Printer Package
Airwolf 3D Printer
Complete Power Supply
Jam Free Extruder Head
.50 Extruder Nozzle (.35 nozzle is available from Airwolf 3D) Integrated Power supply
Borosilicate Glass Build Plate (PET tape pre-applied)
User Manual (Paper Version)
ABS Filament (2 lbs) (3mm)
USB Flash Drive containing all software
USB Connectivity Cord
Tool package containing allen wrenches
Airwolf 3D Printer Features – AW3D HD
Built in Southern California USA of parts made by a 3D printer!
Large build volume of 1150 cubic inches (12x8x12) allows for LARGE single print projects
Proprietary transparent semi-closed frame allows for viewing projects while controlling print environment.
Headed Borosilicate Glass Print Bed
Prints in 18 different filaments for nearly every imaginable project including food containers!
Incredible 50 micron print resolution is 2x more precise than most personal 3D printers. Prints between a desktop consumer print and an industrial 3d printer.
260 F Max Temp Jam Resistant Hot End
Based upon highly developed RepRap platform and improved to add incredible print resolution and build volume.
Open source construction, software and community
SD Card connectivity allows for stand alone printing without connecting to a computer
Upgradable RAMBo circuit board from Ultimachine allows for dual extruder and additional fans
Airwolf 3D Printer Pros – AW3D HD
Large build size allows for large SINGLE print project where building in components isn’t suitable
Semi enclosed transparent build chamber allows for viewing projects being printed while maintaining controled print atmostphere.
Built from a reliable platform of open source design the RepRap 3D printer. Enhanced to incredible 50 micron layer resolution (twice as precise as most all consumer 3D printers).
Heated glass build place ensures smooth printing without warping, drooping and other problems
18 available filaments provides a diversity you won’t find on personal 3D printers
Excellent company with great reviews from existing owners
Airwolf 3D Printer Cons – AW3D HD
Price point is likely to be the first thing people notice as it is slightly higher than many of the main stream consumer models . However the features far exceed these other printers in many ways that just can’t be compared like resolution, filament options, build size etc.
Open source can mean a bit more of a learning curve jumping right in and printing a project may not happen as quick as other “off-the-shelf” models.
Airwolf 3D Printer Price – AW3D HD
The current Airwolf 3D Printer HD models start at just under $3000 and go up as you add features like a dual extruder, higher quality components made form nylon verus PLA and higher temp hot end allowing for more filament options. Smaller bulid volume models are available under the from just under $1700 and have a few less features such as lacking SD Card connectivity, semi enclosed build chamber etc. All in all the price point is slightly higher than more main stream models, but for the added value here you can’t compare this Airwolf to these other personal 3D printers.
Airwolf 3D Printer Filament – AW3D HD
We could (and probably should) write an entire article on just the filaments options for the Airwolf 3D printers. If you’re accustomed to seeing a couple options like PLA and/or ABS then be ready for a shocker when you see the available 16+ options including versions of PLA including flexible, ABS, nylon, polyester, brick and even bronze. Compatible filament size is 3mm and the hot end temperature can be adjusted according to Airwolf to accommodate all of these filaments properly.
Airwolf 3D Printer Review – AW3D HD
If you’re looking for something good enough to do commercial and professional work on, but want to keep the budget at a reasonable level the AIrwolf 3D printer would be a great fit. It has all the features you’ll find on even the best of the best desktop 3D printers and then starts to bring in some features you will only find on commercial models such as the filament range, high temp extruders and large build volume.
While this printer might be a bit more complicated, during assembly and maintenance, due to its roots in the RepRap open source design once calibrated and ready to print it can achieve resolutions as fine as 50 microns which will produce high quality prints and can do so with filaments the other prints can’t dream of.
Built to be upgraded and improved means you’ll likely never outgrow the Airwolf 3D Printer HD, but can add components and features as you grow into it’s abilities or the need arises. The RAMBo circuit board is a solid piece of hardware and will provide years of service.
Jam Resisant high temperature hot ends (extruders) mean less failed prints and more variety again in failaments. This one component is something you want to get right and the include .50 orafice head that is included will give you excellent resolutions with minimal headaches. An optional .35 orafice head is available for even finer resolution.
Though Airwolf doesn’t have a big flashy community like many of the big named companies you’ll find many AW3D HD owners on all the communities sharing knowledge, experiences and designs. Look around and be sure to speak up about which model you own to get into the growing group of folks who own these great printers.
When we first found this printer we said, “Wow, where has thing thing been hiding? If only Airwolf had all the publicity the other 3D printer companies have this thing would be hard to keep on the shelves.” We hope our work in promoting this will help more and more people become aware of this great additive manufacturing machine!

















